STEP #1:Inspect all fabric surfaces for stains, then dry brush the areas to be treated in order to separate the fibers.
PRO TIP:With treating any stain know, or unknown, wear nitrile gloves when treating these stains due to bacteria, germs, or chemicals that might be active in these stains.
STEP #2:Lightly apply the Spot Remover to the stained areas and allow it to dwell until the fabrics are deep cleaned later in the process. This can be done with a spray bottle or an air whip cleaning tool.
STEP #4:Vigorously clean fabrics with the foam (not solution) using an upholstery brush. If needed, you can mix a General-Purpose Cleaner solution in a bucket and agitate to generate foam.
STEP #5:Use the air-whip cleaning tool on the entire floor mat, going side to side in even motions, slightly overlapping.
PRO TIP:When using an air-whip cleaning tool, you want to clean just to the bottom of the fibers. Do not deeply saturate into the base of the carpet.
STEP #6:Once that is done, wipe the floor mat with a clean microfiber towel. Then one final time with a nylon brush.
STEP #12:Generously apply the preferred cleaner with a trigger sprayer, Then, brush the fabric and wipe clean with a microfiber cloth.
STEP #14:There are effective aerosol cleaners available as well. These work very well for carpet, upholstery, and the headliners. For headliners, spray thoroughly onto a microfiber cloth. Then do a 2-foot by 2-foot section, then crosshatch it. Then immediately wipe dry with a separate, dry microfiber cloth.